5.56×45 – 62 Grain FMJBT – Prvi Partizan M855 – 1000 Rounds (32.5¢ per round)

Perfect for use with your AR-15 on the range or when plinking, this 5.56x45mm full metal jacket boat tail (FMJBT) ammunition is manufactured by Prvi Partizan and available at an incredible value in this 1000-round bulk case. The 62-grain FMJBT projectile has a narrow boat tail design intended to improve the accuracy of your shot, while the full metal jacket lessens the buildup of lead deposits in your barrel’s rifling over time; ideal for the dedicated shooter who spends all day at the range. The Boxer-primed brass casings are heat-treated near the neck for reloaders who aim to get the most value out of each cartridge.

Prvi Partizan is located in Uzice, Serbia, and they have been selling their ammunition worldwide to various military and police organizations, including their own, since 1928. They manufacture this 5.56mm ammo according to NATO M855 military specifications which call for harder primers, moisture-resistant primer sealant, and lightly penetrating “green tip” SS109 projectiles. A muzzle velocity and energy of 3050 FPS and 1281 ft/lbs ensures performance that is consistent with common practice ammo.

Make sure to verify your rifle is chambered for 5.56x45mm ammunition before shooting. Rifles chambered for .223 Winchester ammunition are not suitable for the more powerful 5.56x45mm, and you should verify with the manufacturer of your weapon if you have additional questions.

45 ACP – 230 gr FMJ – Blazer Brass – 1000 Rounds (31.0¢ per round)

Newly manufactured in the United States, this product is brass-cased, boxer-primed, non-corrosive, and reloadable. It is a great ammunition for target practice, range shooting, and tactical training. It is economical, reliable, and brass-cased.

The Blazer Brass line of product is manufactured by CCI, an established American manufacturer owned by ATK.

Attention reloaders, Blazer Brass 45 ACP 230 gr FMJ ammunition utilizes small pistol primers instead of the standard for 45 ACP, large pistol primers. These casings are still reloadable using small pistol primers.

45 ACP +P – 230 Grain HST JHP – Federal Premium Law Enforcement – 1000 Rounds

Federal’s Premium Law Enforcement HST line of JHP duty ammunition offers massive expansion! This duty load has a pre-skived bullet tip which causes the bullet to expand into large petals that cause a large permanent wound cavity. The unique design of this bullet actually forces the lead petals during expansion to protect the copper petals behind them. This results in increased weight retention allowing it to still achieve deep penetration through a variety of barriers prescribed by the FBI test protocols.

This product is brand new, nickel plated brass-cased, boxer-primed, non-corrosive, and reloadable.

This is top of the line, American-made defense ammo made by ATK (same company that makes Speer Lawman, CCI, Blazer Brass, etc). This product is designed for Law Enforcement and occasionally made available to the general public through police trade-ins.

5.56×45 – 55 Grain FMJ-BT M193 – PMC – 1000 Rounds (33.0¢ per round)

PMC is gaining popularity in the US market and has now come out with their own 5.56x45mm NATO mil-spec M193 round. This M193 NATO 55 gr FMJ round is manufactured to mil-spec and offers great accuracy for your AR-15 with the added benefit of being more cost effective than many of the American manufactured brands.

It is loaded to NATO specs and is NOT intended for use in commercial or bolt-action rifles chambered for 223 Remington ammo – but is is perfect for your AR15! Please check with your gun manufacturer prior to purchasing this ammo (most AR15’s are fine, but it is best to check first!).

Each round is brass-cased, boxer-primed, non-corrosive, and reloadable. It is both economical and reliable.

45 ACP – 230 gr FMJ – Blazer Brass – 1000 Rounds (31.5¢ per round)

Packaged with five bulk 200 round packs, this newly manufactured 45ACP Blazer Brass ammo is brass-cased, boxer-primed, non-corrosive, and reloadable. It is a great ammunition for target practice, range shooting, and tactical training. It is economical, reliable, and brass-cased.

The Blazer Brass line of product is manufactured by CCI, an established American manufacturer owned by ATK.

Attention reloaders, Blazer Brass 45 ACP 230 gr FMJ ammunition utilizes small pistol primers instead of the standard for 45 ACP, large pistol primers. These casings are still reloadable using small pistol primers.

45 ACP – 230 Grain HST JHP – Federal Premium Law Enforcement – 1000 Rounds

Federal’s Premium Law Enforcement HST line of JHP duty ammunition offers massive expansion! This duty load has a pre-skived bullet tip which causes the bullet to expand into large petals that cause a large permanent wound cavity. The unique design of this bullet actually forces the lead petals during expansion to protect the copper petals behind them. This results in increased weight retention allowing it to still achieve deep penetration through a variety of barriers prescribed by the FBI test protocols.

This product is brand new, nickel plated brass-cased, boxer-primed, non-corrosive, and reloadable.

This is top of the line, American-made defense ammo made by ATK (same company that makes Speer Lawman, CCI, Blazer Brass, etc. This product is designed for Law Enforcement and occasionally made available to the general public through police trade-ins.

5.56×45 – 62 Grain FMJ M855 – PMC – 1000 Rounds (34.0¢ per round)

PMC is gaining popularity in the US market and has now come out with their own 5.56×45 penetrator round. This M855 steel core 62 gr FMJ round is manufactured to mil-spec and offers great penetration with the added benefit of being more cost effective than many of the American manufactured rounds.

It is loaded to NATO specs and is NOT intended for use in commercial or bolt-action rifles chambered for 223 Remington ammo – but it is perfect for your AR15! Please check with your gun manufacturer prior to purchasing this ammo (most AR15’s are fine, but it is best to check first!).

Each round is brass-cased, boxer-primed, non-corrosive, and reloadable. It is both economical and very reliable.